www.camstoppers.com - The Remote Installation Device Camstopper

Product Selector > Camstopper™ Remote Installation Device (RiD)



	1. Load the Camstopper™ into the jaws of the RiD.

	2. Offer the Camstopper™ into the chamber.

	3. Locate the Camstopper™ in the pipe to be sealed.

	4. Press downwards to actuate the seal.

	5. Remove the RiD (optional) and leave the Camstopper™ in place.

	6. After works re-locate the RiD using the hook provided.

	7. Pull upwards to release the Camstopper™ from the pipe.

	8. Remove the Camstopper™ from the chamber.

Camstopper™

For years the only way to seal off the flow in a drain or a sewer was the mechanical wing-nut plug.

ASP Changed this with the introduction of the patented Camstopper™ 20 times quicker to install & non man-entry retrieval.

Now we launch the patented Camstopper™ Remote Installation Device.

For the first time ever... full non man entry flow stopping and retrieval!

Operational

- Non man entry installation and retrieval
- Stops flow in 4" & 6" pipes, up to 3m deep
- No confined space entry needed
- No contact with effluent or sewage

Legal

- All statutory sewerage undertakers Health & Safety Policy must comply with Confined Space Regulations 1997
- Principal rule of CSR 1997, if task is possible externally, do not enter.
- Essential legislators requirement to use this tool where possible
- Don't invite prosecution; use the Camstopper™ & RiD

New Flow Stopping Proceedure

- No written Risk Assessment (incorporated into company procedures)
- No requirement for man-entry PPE
- No requirement for rescue equipment

See videos of the Camstopper™ Remote Installation Device in action - Click here

RiD Model	Nominal Length	Fully Extended Length	Pipe Sizes (Imperial)	Pipe Sizes (metric)	Application Success
Professional Drain	1m	1250mm	4" & 6"	100 & 150mm	98%
Professional Sewer	2m	1250 - 2327mm	4" & 6"	100 & 150mm	96%
Sewer Deluxe	3m	1250 - 3323mm	4" & 6"	100 & 150mm	92%

Back